Electrolyser
Telemetry
| Field | Description |
|---|---|
timestamp | Message publishing timestamp |
status | Electrolyser states |
alerts | List of electrolyser errors and warnings |
LSHH102A_in | Indicates whether electrolyte level is higher than very high level |
LSH102B_in | Indicates whether electrolyte level is higher than high level |
LSM102C_in | Indicates whether electrolyte level is higher than medium level |
LSL102D_in | Indicates whether electrolyte level is higher than low level |
h2_flow | H2 Production in Normal Litre/hour |
h2_total | Total H2 Produced in Normal Litre |
PT101A_in_bar | H2 Stack Pressure in Bar |
PSU_in_v | H2 Stack Voltage in Volt |
HASS_in_a | H2 Stack Amperage in Ampere |
PT101C_in_bar | H2 Outlet Pressure in Bar |
PT105_in_bar | Water Inlet Pressure in Bar |
TT102A_in_c | Electrolyte Tank Temperature in Celsius |
TT106_in_c | Downstream Temperature in Celsius |
Commands
| Command Name | Description | Arguments |
|---|---|---|
start | Start electrolyser | |
stop | Stop electrolyser | |
reset | Reset electrolyser | |
set_production_rate | Set electrolyser production rate (in percents) | value (float) |
set_waterfill | Force electrolyser to perform water refill operation | value (boolean) (should be set to true) |
Electrolyser States
| State |
|---|
| maintenance |
| expert |
| halt |
| error |
| fatal |
| idle |
| steady |
| standby |
| curve |
| blowdown |
💬 Need Help?
Have a question or hit a roadblock? Join the Enapter Discord community to get quick support, exchange ideas, and collaborate with other developers and energy experts.